READYMESH PF-540 Monofilament stranded macro-fibre structural for industrial flooring

Description

READYMESH PF-540 is a stranded structural polyolefin macro-fibre, high-performance, with a length of 54 mm, specific for the realisation of continuous surfaces made of concrete, it can also be used in replacement of traditional steel reinforcement. The texture, length and surface finishing of READYMESH PF-540 was designed and developed specifically for "exposed" applications, such as industrial floors made of concrete.

Use fields

Industrial flooring, also in replacement of steel mesh. Prefabrication. Widespread three-dimensional high anisotropy reinforcement of concretes in general.

READYMESH PF-180 Monofilament stranded macro-fibre structural for micro-concretes

Description

READYMESH PF-180 is a stranded structural polyolefin macro-fibre, high-performance, with a length of 18 mm, specific for the realisation of micro-concretes. The texture, length and surface finishing of READYMESH PF-180 was designed and developed specifically for "exposed" applications.

Use fields

Structural reinforcement for very high-performance micro-concretes. Prefabrication. Widespread three-dimensional high anisotropy reinforcement of concretes in general.

READYMESH PS-480 Monofilament macro-fibre for structural spritz-beton and prefabrication

Description

Structural polyolefin macro-fibre, high performance, for improved adherence, with a length equal to 48 mm, specific for structural applications, even as a substitute for conventional steel reinforcements (on specific request it is possible to supply READYMESH PS with a variable length between 24 mm and 48 mm). READYMESH PS-480 increases the absorption of energy of the product in case of breakage and yielding, it gives the concrete a greater resistance to the forces of traction/bending, it reduces the risk of breakage of the concrete component in the corners and edges. It also reduces the phenomenon of segregation of the concrete during the installation and it reduces the risk of corrosion of the reinforcing rods (if present) due to the reduction in cracking from plastic shrinkage.

Use fields

It can be used where widespread structural and three-dimensional reinforcement of the conglomerate is required. It is particularly indicated in structural applications and in severe operating conditions (after static-structural calculation). The main applications, to name a few, are projected concretes (spritz-beton, shotcrete, shotcrete), mass concrete, base slabs and underpinning, structural slabs, medium and large prefabrication, etc.

READYMESH PS-380 Monofilament polyolefin macro-fibre specific for prefabrication

Description

Structural polyolefin macro-fibre, high performance, for improved adherence, with a length equal to 38 mm, to be added to the concrete during mixing, specific for structural applications, even as a substitute for conventional steel reinforcements (only with the approval of the structural engineer in charge). READYMESH PS-380, thanks to its performance yield, its form factor and length, is particularly suited for applications in the field of industrial prefabrication.

Use fields

By adding to concrete material for the production of prefabricated components, also of large dimensions. It can also conveniently be used for the structural reinforcement of three-dimensional concrete in general.

READYMESH PM-180 Multi-filament fibre 18 mm for screeds and concrete in general

Description

READYMESH PM-180 is an auxiliary, multi-filament polypropylene micro-fibre, with CE marking, 18 mm long, suitable for the addition to cement conglomerates in general. The addition of READYMESH PM-180 to the mix counters the cracking phenomenon due to plastic shrinkage of the concrete, as well as having positive effects on the durability of the mix, resistance to frost/defrosting and resistance to knocks and overall impermeability.

Use fields

Sub-base screeds (also for radiating systems), fine casts, small pre-fabricated works, concrete floors, ballasts in cement mix and structures in concrete in general, also combined with traditional metal reinforcements.

READYMESH PM-120 Multi-filament fibre 12 mm for screeds and concrete in general

Description

READYMESH PM-120 is an auxiliary, multi-filament polypropylene micro-fibre, with CE marking, 12 mm long, suitable for the addition to cement conglomerates in general. The addition of READYMESH PM-120 to the mix counters the cracking phenomenon due to plastic shrinkage of the concrete, as well as having positive effects on the durability of the mix, resistance to frost/defrosting and resistance to knocks and overall impermeability.

Use fields

Sub-base screeds (also for radiating systems), fine casts, small pre-fabricated works, concrete floors, ballasts in cement mix and structures in concrete in general, also combined with traditional metal reinforcements.

READYMESH PM-060 Multi-filament fibre 6 mm for lime based plaster, cement or mixed

Description

READYMESH PM-060 is an auxiliary, multi-filament polypropylene micro-fibre, 6 mm long, suitable for addition to cement conglomerates with a lime or mixed base. The addition of READYMESH PM-060 to the mix counters the cracking phenomenon due to plastic shrinkage of the plaster, mortar, screed or concrete, as well as having positive effects on the durability of the mix, resistance to frost/defrosting and resistance to knocks and overall impermeability.

Use fields

READYMESH PM-060 is an auxiliary fibre used in a multitude of application fields, where three-dimensional reinforcement and diffusion of the cement conglomerate and/or lime base is required. It is a particularly indicated fibre for addition to small manufactured works or for plaster, even in small thickness and with reduced granulometry inerts.

READYMESH PW-120 12mm fibrillated polypropylene micro-fibre for screeds and concrete

Description

READYMESH PW-120 is an auxiliary fibrillated polypropylene micro-fibre, with a length of 12 mm, suitable for adding concrete in general. The addition of READYMESH PW-120 to the mixture allows for preventing the phenomenon of cracking from plastic shrinkage of the concrete, as well as having positive effects as regards the ductility of the mixture, the resistance to freezing/thawing, the shock resistance and overall watertightness.

Use fields

Subbase screeds(even with radiant systems), small thickness small prefabrication casts, concrete floors, ballasts in cement mix and concrete structures in general, even in combination with traditional metal reinforcement.

READYMESH MX-500 High performance 50mm steel fibres

Description

READYMESH MX-500 is a special carbon steel fibre, obtained by the extrusion and cutting of high-strength steel wire. Its special double-hooked form gives it a remarkable shear strength, thus conferring the concrete with excellent post-cracking structural strength even at low doses. READYMESH MX-500 significantly increases the mechanical performance of the structure in terms of toughness, ductility, fatigue, dynamic stress, shock, wear, tensile and shear strength and even post-cracking and damage behaviour.

Use fields

General preparation of fibre-reinforced concrete with high pre and post-cracking performance. Ideal for industrial flooring and prefabrications.

READYMESH MF-500 Structural steel fibres for concrete flooring

Description

"Carbon steel fibres, obtained by the cutting of metal wire, with improved adhesion profile, for three-dimensional general structural reinforcement of cement-based conglomerates. The addition of READYMESH MF-500 significantly increases the mechanical performance of the structure in terms of toughness, ductility, fatigue, dynamic stress, shock, wear, tensile and shear strength and even post-cracking and damage behaviour."

Use fields

General preparation of fibre-reinforced concrete and structural sprayed concrete (e.g. shotcrete). Particularly suitable for high strength industrial flooring and prefabrication.

READYMESH MS-350 High-adherence steel fibres of length 35 mm

Description

Carbon steel fibres, with a profile for improved adherence to the dimensional reinforcing, structural, of concretes in general. The addition of READYMESH MS-350 allows for considerably increasing the mechanical performance of the product in relation to tenacity, ductility and resistance to fatigue, the resistances to the dynamic stresses, the mechanical tensile and bending behaviour, even post-crack, and resistance to impact and wear.

Use fields

Production of grouts and fibre-reinforced concretes in general, sprayed structural concretes (shotcrete). In addition, due to their contained length, the fibres READYMESH MS-350 are particularly suitable for the production of pre-cast blocks.

READYMESH MM-150 15mm thin steel fibres

Description

Fibres, obtained by the cutting of steel wire, with improved adhesion profile, for three-dimensional general structural reinforcement of cement-based conglomerates. The addition of READYMESH MM-150 significantly increases the mechanical performance of the structure in terms of toughness, ductility, fatigue, dynamic stress, shock, wear, tensile and shear strength and even post-cracking and damage behaviour. READYMESH MM-150 are particularly recommended for increasing ductility, toughness and thermal conductivity in concrete coatings for floor heating systems.

Use fields

General preparation of screeds, cements and fibre-reinforced concrete. Particularly recommended for compact prefabrications, thin concrete floorings and radiant floor heating systems.

READYMESH MR-200 Brass-plated micro-fibres for structural cement conglomerates

Description

Brass-plated steel micro-fibres, obtained by cutting metal wire, for structural reinforcement of cement-based conglomerates in general. READYMESH MR-200 is a very thin brass-plated steel wire with a diameter of 0.22 mm and a length of 20 mm, mainly used for reinforcing concrete and high-performance mortars.

Use fields

The READYMESH MR-200 micro-fibres are widely used as main and unique reinforcement for low thickness structural mortars, sprayed plasters and concretes (shotcrete, spritz-beton), precast concrete products.

READYMESH MR-060 Brass-plated steel microfibres for cement conglomerates in general

Description

Steel microfibres obtained by metal wire offcuts, used for cement conglomerates generally. READYMESH MR-060 is comprised of very thin brass-plated steel wires with a diameter of 0.22 mm and a length of 6 mm, mainly used to control shrinkage and to reinforce plasters and mortars.

Use fields

READYMESH MR-060 microfibres are used for cement conglomerates generally. Considering the dimensional characteristics (aspect ratio: length/diameter = 27) the main usages is for medium or fine particle size mortars, plasters and sprayed concrete (shotcrete), a prefabricated low-thickness cement with complex profiles.